• Study on Compressive Strength of Quarry Dust as Fine

    (c) The compressive strength results of quarry dust concrete (cubes) were obtained in the third series, where M20, M25, and M30 grades of concrete with 20, 25, and 30 percent replacement of quarry dust and also workability are studied by varying the water-cement ratio

  • Cited by: 6
  • Use of Quarry Dust to Replace Sand in Concrete An

    Use of Quarry Dust to Replace Sand in Concrete compressive strength of concrete cubes at the age of 7 and 28 days were obtained at room temperature. Also the temperature effect on concrete cubes at 100oC on 28th day of casting was carried out to check the loss of strength. From test results it was found that the maximum compressive strength is obtained only at 50% replacement at room

  • (PDF) Study on Compressive Strength of Quarry Dust as Fine

    Prakash et al [3] assessed the use of dust for normal concrete, reporting that a 40% replacement of fine aggregate by quarry dust resulted in the highest compressive strength. In the study

  • COMPRESSIVE STRENGTH OF CONCRETE USING LATERITIC SAND

    5mm in size [24]. The use of quarry dust in concrete according to Chaturanga et al., [25] is desirable because of the benefits such as useful disposal of a by-product, reduction of river sand consumption and increase in strength. Quarry dust has rough, sharp and angular particles, and as such causes a gain in strength due to better interlocking.

  • Compressive strength of concrete using lateritic sand and

    1/01/2012· Compressive strength of concrete using lateritic sand and quarry dust as fine aggregate . Article (PDF Available) · January 2012 with 6,144 Reads

  • An Experimental study on compressive strength of Quarry

    An Experimental study on compressive strength of Quarry Dust as fine aggregate in concrete Naushad Khan1, Quarry dust is a result of crushers while doing quarrying activities. The cubes were casted using standard cubes of 150 mm × 150 mm × 150 mm. Specific gravity of sand and quarry dust of 2.62 and 2.70. 53 grade cement is used for the mix. Curing was done by conventional moist curing

  • An Experimental study on compressive strength of Quarry

    An Experimental study on compressive strength of Quarry Dust as fine aggregate in concrete Naushad Khan1, Quarry dust is a result of crushers while doing quarrying activities. The cubes were casted using standard cubes of 150 mm × 150 mm × 150 mm. Specific gravity of sand and quarry dust of 2.62 and 2.70. 53 grade cement is used for the mix. Curing was done by conventional moist curing

  • Improved Concrete Properties Using Quarry Dust as

    Quarry dust is known to increase the strength of concrete over concrete made with equal quantities of river sand. The Compressive strength of quarry dust concrete continues to increase with age for all the percentage of quarry dust contents. The utilization of quarry dust as fine aggregate would turn this waste material that causes disposal

  • Partial Replacement of Sand by Quarry Dust in Concrete

    4. [5]According to the value of compressive strength collected, the value is high and it show that quarry dust suitable to use as sand replacement. All the value of compressive strength surpasses the minimum value of compressive strength for normal concrete that is 7N/mm . So, quarry dust can apply as sand replacement in

  • Stone Dust in Concrete: Effect on Compressive Strength

    S Shetty, 2013). The compressive strength of concrete from stone powder showed 14.76% higher value than that of the concrete made of normal sand (Mahzuz et al., 2011). It is found that the compressive and flexural strength of concrete made of Quarry Rock Dust are nearly 10% more than the conventional concrete (Suribabu et al., 2015). In the present

  • (PDF) Use of Quarry Dust to Replace Sand in Concrete An

    This experimental study presents the variation in the strength of concrete when replacing sand by quarry dust from 0% to 100% in steps of 10%. M20 and M25 grades of concrete were taken for study keeping a constant slump of 60mm. The compressive

  • Behaviour of Concrete on the Use of Quarry Dust and

    Behaviour of Concrete on the use of Quarry dust and Superplasticizer to replace Sand DOI: 10.9790/1684-1404070611 iosrjournals 10 Page Figure 3: Compressive strength test of sample Figure 4: Cube after failure Comparative study:

  • STRENGTH AND DURABILITY STUDIES ON CONCRETE USING QUARRY

    stone quarries while crushing stones, stone crusher dust, compressive strength of concrete for 7 days, 14 days and 28 days and type of mix made with quarry dust. From the table, it is inferred that the control mix and the mix M1 will give approximately equal strength in 7 days. For M2, the strength was reduced, but it is acceptable. For M3, the strength was reduced to about 18.12 %. For 14

  • Research Article Study on Compressive Strength of Quarry

    Research Article Study on Compressive Strength of Quarry Dust as Fine Aggregate in Concrete K.ShyamPrakash 1 andCh.HanumanthaRao 2 Department of Civil Engineering, PVP Siddhartha Institute of Technology, Kanuru, Vijayawada, Andhra Pradesh, India

  • Investigating Strength Properties of Geopolymer Concrete

    The results indicated that geopolymer concrete achieved comparably equal strength to that of the reference concrete mixture at a 100% quarry dust level. External exposure and ambient curing can be practiced to attain comparable strength properties of geopolymer concrete with quarry dust as fine aggregate. Experimental values of split tensile

  • Can we make concrete using quarry dust as a replacement

    Yes As quarry dust(also called as crushed sand) is a byproduct obtained after crushing of stones(rocks) to make aggregates. * Results have shown that the concrete

  • application of quarry dust in concrete construction Flat

    (17) Sahu A.K. et.al reported significant increase in compressive strength, modulus of rupture and split tensile strength when 40 percent of sand is replaced by Quarry Rock Dust in concrete. Ilangovan and Nagamani(18,19) reported that Natural Sand with Quarry Dust as full replacement in concrete as possible with proper treatment of Quarry Dust before utilization.

  • Effect of quarry rock dust on the flexural strength of

    The effect of quarry dust on the flexural strength of concrete has been experimentally studied and reported in this paper. Concrete used was prepared by replacing 25% and 100% of sand by weight with quarry dust.

  • (PDF) Compressive Strength of Concrete Using Lateritic

    The compressive strength of concrete using quarry dust as fine laterite and quarry dust used in the experiments were those aggregate and mixing with admixture type E, it was found passing sieve (2mm) and retained on sieve (150µm). All that with 70% quarry dust the concrete produced tests were conducted according to the relevant British

  • Strength and durability properties of concrete containing

    has also been made to durability studies on Quarry Rock Dust when compared with the Natural Sand concrete. It is found that the compressive, flexural strength and Durability Studies of concrete made of Quarry Rock Dust are nearly 10% more than the conventional concrete. Keywords: concrete, quarry rock dust, river sand, strength, properties

  • Compressive strength of concrete using lateritic sand and

    Samples of concrete (eg. cubes) were made using varying contents of laterite and quarry dust as fine aggregate. The quantity of laterite was varied from 0% to 100% against quarry dust at intervals of 25%. The samples were cured for specified periods and tested in the laboratory for compressive strength. Workability tests were earlier carried

  • Water Absorption and Compressive Strength of Self

    Table 2 and Figure 3 indicated the findings of compressive strength of SCC mixed with quarry dust and fly ash. Compressive test were conducted in 7 and 28 days curingperiod. The obtained result shows higher compressive strength in 28 days curing period compare to 7-days curing. . The average compressive strength of concrete cubes for 10% quarry

  • Experimental study on high volume fly ash concrete made

    19/08/2019· Compressive strength is decreased when increasing of fly ash content in cement concrete (50% and 75% is replaced by cement). 28 days cube compressive strength of 5% coir pith and 75% quarry dust replacement of sand concrete is 13.26% decreased to the conventional concrete cube. 56 days cube compressive strength of 5% coir pith and 75% quarry

  • Assessment of Mine Tailing and Quarry Dust as Joint

    Concrete preparation was done by keeping constant the mine tailings portion as coarse aggregate, while partially replacing river sand by quarry dust at different fractions as 0%, 10%, 30% and 50%. It was established that, comparatively to normal concrete at 28 days, the compressive and tensile strengths of concrete with mine-tailings and river sand increased from 27MPA to 37.5 MPA, and from 1

  • Feasibility of Quarry Dust to Replace River Sand as Fine

    Feasibility of Quarry Dust to Replace River Sand as Fine Aggregate of Concrete R W C N Rajapaksha and H P Sooriyaarachchi Abstract: High cost and scarcity of river sand is one of the main problem faced by construction industry today. Use of substitutions like offshore sand in particular to replace river sand is on the rise.

  • EXPERIMENTAL STUDY ON PARTIAL REPLACEMENT OF CEMENT

    Key words: Metakaolin, Quarry dust, M- sand, Flexural strength, compressive strain, and tensile strain. INTRODUCTION Ordinary Portland cement and water are the most commonly used building material throughout the world and they retain their status, because of demand and expansion of construction industry all over the world. Further the greatest